SEKI Chemical

BRAZING PASTE ALLOY

(Al CENO PASTE FLUX - 5APS)

NOTE

       THIS MATERIAL FORMULATED EXCULUSIVELY FOR USE WITH SEKI

       APPLICATOR SYSTEMS AND SEKI BRAZING AND SOLDERING MACHINES

       SEKI INCORPORATED WARRANTS THAT THIS MATERIAL HAS BEEN

       MANUFACTURED TO ITS STANDARD SPECIFICATIONS DEFECTS MUST

       BE REPORTED TO SEKI WITHIN 90 DAYS OF MANUFACTURE LIABILITY

       IS LIMITED TO REPLACEMENT OF DEFECTIVE MATERIAL

DIRECTIONS

       1. STIR WELL BEFORE USING

       2. STORE IN AMBIENT TEMPERATURE OF 55 - 75 ^OF

       3. SEAL CONTAINER AFTER USING

CAUTION

       DO NOT TAKE INTERNALLY AVOID CONTACT OF PASTE WITH EYES OR

       SKIN USE ONLY IN WELL VENTILATED AREAS OR WITH EYES FLUSH

       IMMEDIATELY WITH CLEAR WATER FOR 15 MINUTES CONTACT A

       PHYSICIAN

WARNING

       PROTECT YOURSELF & OTHERS, READ & UNDERSTAND THIS LABEL

       FUNES & GASES CAN BE DANGEROUS TO YOUR HEALTH HEAT RAYS

       (INFRARED RADIATION FROM FLAME OR HOT METAL ) CAN INJURE

       EYES READ & UNDERSTAND THE MANUFACTURER'S INSTRUCTIONS &

       YOUR EMPLOYER'S SAFETY PRACTICES HEAR CORRECT EYE, EAR, &

       BODY PROTECTION CAUTION CONTAINS FLUORIDES THIS PASTE WHEN

       HEATED GIVES OFF FUMES THAT MAY IRRITATE EYES, NOSE AND

       THROAT AVOID FUMES - USE ONLY IN WELL VENTILATED SPACES

       AVOID CONTACT OF PASTE WITH EYES OR SKIN DO NOT TAKE

       INTERNALLY KEEP OUT OF REACH OF CHILDREN SEE.

CENO Paste Flux - 5APS (Al Paste)

       How to use : 1. Paste Flux - 5APS 5Kg

                          2. Distillation water 4Kg + Polyol  NP10    4g

                          3. CENO FLUX - AK 1.5Kg